Publications

97.	Optical band gap engineering in ZnO-MgO films prepared by combustion spray pyrolysis: R Kavitha and V. Jayaram J. Electronic Maters. - accepted (2007)
96.	Photocatalytic properties of titania and zinc oxide films made by combustion pyrolysis: R Kavitha, S Meghani, V. Jayaram Mater. Sci. Engg B - Accepted (2007)
95.	Flow in porous ceramics: understanding with non-uniform capillary models: D. Patro and V. Jayaram J. Am. Ceram. Soc. - in press (2007)
94.	Toughening through multi-layering in TiN-AlTiN films: S. J. Suresha, Souvik Math, V. Jayaram and S. K. Biswas Phil. Mag. A - in press (2007)
93.	Ultra mild wear in lubricated triboloty of an aluminium alloy: Sarmistha Das. Varalakshmi K., V. Jayaram and S. K. Biswas Int. J. Tribology - in press (2007)
92.	A general contact mechanical formulation of multilayered structures and its application to deconvolute thickness/mechanical properties of glue used in Surface Force Apparatus: Souvik Math, Roger Horn, Vikram Jayaram, Sanjay Kumar Biswas Journal of Colloid and Interface Science, 308 (2), 551-561 (2007)
91.	Crack growth resistance (R-Curve) behaviour and thermo-physical properties of Al2O3 particles reinforced AlN/Al matrix composites: B Srinivasa Rao, J. Rodel and V.Jayaram Composites Part A: Applied Science and manufacturing 38 (3) 1038-1050 (2007)
90.	Validation of stresses and stress intensity factors in a notched bi-layer system under four point bending as determined by the solution of Navier.s equation: Sibasish Mukherjee, V.Jayaram and S. K. Biswas Int. J. Mech. Sci. 48(11), 1287-1294 (2006)
89.	Indentation of a hard film on a compliant substrate: film fracture mechanisms to accommodate substrate plasticity: S. Math, S. J. Suresha, V.Jayaram and S. K. Biswas J. Mat. Sci. 41 (23) 7830-7837 (2006)
88.	Processing, microstructure and Hardness of TiN/(Ti,Al)N multilayer coatings: S. J. Suresha, R. Bhide, V.Jayaram and S. K. Biswas Mat. Sci. Engg. A 429(122), 252-260 (2006)
87.	Deposition and characterisation of alumina films produced by combustion flame pyrolysis: R. Kavitha and V.Jayaram Surf. Coat. & Tech. 201 (6), 2491-2499 (2006)
86.	Contact deformation of TiN coatings on metallic substrates: V.Jayaram, S. Bhowmick, Z.-H Xie, S Math, M. Hoffman, and S. K. Biswas Mater. Sci. Engg. (A) 423 (122), 8-13 (2006)
85.	Al/SiC carriers for microwave integrated circuits by a new technique of pressureless infiltration: B. Srinivasa Rao, C. Hemambar, A. V. Pathak, K. J. Patel, J. Rödel and V.Jayaram, IEEE Transactions on Electronics Packaging Manufacturing 29(1), 58-63 (2006)
84.	Spherical indentation of a film / substrate system: Part 2. A comparative assessment of the influence of film thickness and substrate deformation on crack driving forces in columnar coatings: S. Math, V.Jayaram and S. K. Biswas, J Mater. Res. 21(3), 783-790 (2006)
83.	Spherical indentation of a film / substrate system: Part 1. Experimental validation of elastic stresses and strains derived using Hankel transform technique: S. Math, V. Jayaram and S. K. Biswas, J Mater. Res. 21(3), 775-782 (2006)
82.	Low temperature pressure consolidation of amorphous Al₂O₃-Y₂O₃: N. Thangamani, A.S.Gandhi, V.Jayaram and A.H.Chokshi, J. Am. Ceram. Soc. 88 (10), 2696-2701 (2005)
81.	Fracture mode transitions during indentation of TiN coatings on steel: S. Bhowmick, Z.-H Xie, M. Hoffman, V. Jayaram and S. K. Biswas, Phil. Mag. (A) 85(25), 2927-2945 (2005)
80.	Mechanical properties of rough TiN coating deposited on steel by cathodic arc evaporation technique: R. Gunda, S. Bhowmick, V. Jayaram and S. K. Biswas, J. Am. Ceram. Soc. 88(7) 1831-1837 (2005)
79.	Deconvolution of Fracture Property from Load-Displacement Curves of TiN films on Steels: S. Bhowmick, V. Jayaram and S. K. Biswas, Acta Mater. 53, 2459-2467 (2005)
78.	Low temperature reactive hot pressing of TiB₂ - TiN composites: L. Rangaraj, C. Divakar and V. Jayaram, J. Am. Ceram. Soc. 87(10), 1872-1878 (2004)
77.	The nature of contact deformation of TiN films on steel: S. Bhowmick, Z.-H Xie, M. Hoffman, V. Jayaram and S. K. BiswasJ. Mater. Res. 19(9) 2616-2624, 2004.
76.	Oxide films by combustion pyrolysis of solution precursors: R. Kavitha, S. Hegde and V. Jayaram, Mater. Sci. Eng. A 359 (1-2) 18-23 (2003)
75.	Contact Damage in TiN Coatings on Steel: S. Bhowmick, A. N. Kale, V. Jayaram and S. K. Biswas_, Thin Solid Films 436, 250-258 (2003)
74.	Non-viscous, Plastic Flow in a Glass of Zirconium Oxide – Aluminium Oxide: A.S. Gandhi and V. Jayaram, Acta Materialia 51(6) 1641-1649 (2003)
73.	Bulk, Dense, Nanocrystalline Yttrium Aluminum Garnet by Consolidation of Amorphous Powders at Low Temperatures and High Pressures: Samrat Choudhury, Ashutosh S. Gandhi, and V. Jayaram, J. Am. Ceram. Soc. 86.(2), 247-251 (2003)
72.	The need to productionise Metal Metrix Composites for Space Microwave Application in India: A V Pathak, K J Patel, Ch Hemamber and V. Jayaram, ISAMPE National Conference 2002, (INCCOM-1) 93-99 (2002)
71.	Pressure consolidation of amorphous ZrO₂ - 40 % Al₂O₃ by plastic deformation: A. S. Gandhi and V. Jayaram, Acta Materialia 50, 2137-2149 (2002)
70.	The influence of oxygen impurities on the formation of AlN-Al composites by infiltration of molten Al-Mg: S. Swaminathan, B. Srinivasa Rao and V. Jayaram, Mater. Sci. Engg. A337, 134-139 (2002)
69.	The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen: S. Swaminathan, B. S. Rao and V. Jayaram, Acta Materialia 50 (12), 3093-3104 (2002)
68.	Al-SiC electronic packages with controlled thermal expansion coefficient by a new method of pressureless infiltration: C. Hemambar, B. S. Rao and V. Jayaram, Journal of Materials and Manufacturing Processes 16 (6), 779-788 (2001)
67.	A new technique for pressureless infiltration of aluminium alloys into alumina preforms: B. S. Rao and V. Jayaram, J. Mater. Res, 16 (10), 2906-2913 (2001)
66.	Effect of rapid solidification on microstructural evolution in MgO - MgAl₂O₄:Tania Bhatia, Kamanio Chattopadhyay and V. Jayaram, J. Am. Ceram. Soc. 84, 1873-80 (2001)
65.	Pressureless infiltration of Al-Mg based alloys into alumina preforms: mechanisms and phenomenology: B. S. Rao and V. Jayaram, Acta Materialia 49, 2373-2385 (2001)
64.	Non-equilibrium phase synthesis in Al₂O₃ – Y₂O₃ by spray pyrolysis of nitrate precursors: C. K. Ullal, K. R. Balasubramanian, A. S. Gandhi and V. Jayaram, Acta Materialia 49, 2691-2699 (2001)
63.	Low temperature densification behavior of metastable phases in zirconia - alumina powders produced by spray pyrolysis: A. S. Gandhi, V. Jayaram and A. H. Chokshi, Mater. Sci. Engg. A304-306, 785-789 (2001)
62.	Soft chemical routes to the synthesis of extended solid solutions of wurtzite ZnO - MO (M=Mg,Co,Ni): V. Jayaram and B. Sirisha Rani, Mater. Sci. Engg. A304-306, 800-804 (2001)
61.	Directed Melt Oxidation: V. Jayaram and D.Brandon, in " Handbook of Ceramic Hard Materials " (ed.) R.Riedel, Wiley, 289-321 (2000)
60.	Influence of matrix characteristics on fracture toughness of high volume fraction Al₂O₃/Al-AlN composites: N.Nagendra and V. Jayaram, J Mater. Res. 15, 1145-1153 (2000)
59.	Fracture and R-curves in Al₂O₃ / Al-AlN composites: N.Nagendra and V. Jayaram, J Mater. Res. 15, 1131-1144 (2000)
58.	Segregation in the MgO-MgAl₂O₄ system prepared from nitrate precursors: T.Bhatia, K.Chattopadhyay and V. Jayaram, J Mater. Res. 14, 3319-3327 (1999)
57.	Dense amorphous zirconia-alumina by low temperature consolidation of spray pyrolysed powders: A.S.Gandhi, V. Jayaram and A.H.Chokshi, J Am. Ceram. Soc 82, 2613-2618 (1999)
56.	Microstructures and properties of Al₂O₃ / Al-AlN composites by pressureless infiltration of Al - alloys: N.Nagendra, B.S.Rao and V. Jayaram, Mater. Sci. Engg. A269, 26-37 (1999)
55.	Wear of melt oxidised alumina matrix composites: V. Jayaram and S.K.Biswas, Wear 225-229, 1322-1326 (1999)
54.	ZrO₂-Al₂O₃ nanocomposite by high pressure sintering of spray pyrolysed powders: R.S.Mishra, V. Jayaram, B.Majumdar, C.E.Lesher and A.K.Mukherjee, J Mater. Res. 14, 834-840 (1999)
53.	Densification studies on amorphous ZrO₂ - Al₂O₃ powders: A.S.Gandhi, V. Jayaram and A.H.Chokshi, Proc. Symp. on Creep Behaviour of Advanced Materials for the 21^st Century, The Minerals, Metals and Materials Society, Warrendale, USA, 369-378 (1999)
52.	A dislocation pile-up model for the yield stress of a composite: V. Jayaram, N.N.Viswanathan and T.A.Abinandanan, Acta Mater. 47, 1635-1643 (1999)
51.	Abrasion of Al₂O₃-SiC-(Al,Si) composites made by melt oxidation: R.Arvind Singh, V. Jayaram and S.K.Biswas, J Mater. Res. 14, 64-67 (1999)
50.	The synthesis of wurtzite based solid solutions of ZnO-CoO by spray pyrolysis: V. Jayaram, J.Rajkumar and B.Sirisha Rani, J Am. Ceram. Soc. 82, 473-476 (1999)
49.	Studies on the deformation behavior of nano-crystalline Nd-Fe-B magnets: Prakash Narayan S, Basu K, V. Jayaram, Prasad YVRK, Das B N, Rare-Earth Magnets and their Applications. Proceedings of the Fifteenth International Workshop. Werkstoff-Infortionsgesellschaft GmbH, Frankfurt, Germany, L. Schultz and K.-H.Mueller (ed.). 349-358 (1998)
48.	Zirconia based nanomaterials: elaboration, characterisation and transport properties: H.Bousetta, A.Rouanet, F.Sibieude, A.Amdouni-Cheikh, A.Madani, C.Roucau, E.Snoeck, N.Brun, C.Georgescu, D.Lelievre, R.R.Piticescu, C.P.Carry, S.Begin-Colin, A.S.Gandhi and V. Jayaram, Inzyneria Materialowa (Poland)(1998)
47.	A study of the deformation behaviour of nano-crystalline Fe-Nd-B magnets: S.Prakash Narayan, K.Basu, Y.V.R.K.Prasad and V. Jayaram, Proc. 3^rd Pacific Rim International Conference on Advanced Materials and Processing, (eds.) M.A.Imam, R.DeNale, S. hanada, Z. Zhong and D. N. Lee, The Minerals, Metals and Materials Society, Warrendale, 905 (1998)
46.	The initiation and continuation of infiltration of Al-Mg based alloys into alumina preforms: B. S. Rao and V. Jayaram, Proc. 3^rd Pacific Rim International Conference on Advanced Materials and Processing, (eds.) M.A.Imam, R.DeNale, S.hanada, Z.Zhong and D.N.Lee, The Minerals, Metals and Materials Society, Warrendale, 367 (1998)
45.	A study on the formability of melt-spun Fe-Nd-B magnets: S.P.Narayan, K.Basu, Y.V.R.K.Prasad, V. Jayaram and B.N.Das, Scripta Mater. 38, 1725 (1998)
44.	Analysis of micro-residual stresses in 6H-SiC particles within Al₂O₃-SiC-(Al,Si) using Raman spectroscopy: R.Arvind Singh, A.K.Sood, V. Jayaram and S.K.Biswas, Scripta Mater. 38, 617 (1998)
43.	Dense nanometric ZrO₂-Al₂O₃ from spray pyrolysed powders: V. Jayaram, R.S.Mishra, B.Majumdar, C.Lesher and A.K.Mukherjee, Colloids and Surfaces A 133, 25 (1998)
42.	Nano-dispersed microstructures on laser mixing of Al-Ni multilayers: D.Srinivasan, V. Jayaram and K.Chattopadhyay, Scripta Mater. 38, 857 (1998)
41.	Coarsening of an interconnected microstructure in an Al-Al₂O₃ composite: P.Padmapriya, T.A.Abinandanan and V. Jayaram, Scripta Mater. 37, 1883 (1997)
40.	Nanostructures and amorphous materials by decomposition of precursors: V.Jayaram, Multi-Facets of Metallurgy: Emerging Trends, Annual Technical Meeting, The Indian Institute of Metals, A Chatterjee ( ed.), The Indian Institute of Metals, 165-176 (1997)
39.	Effect of liquid precursor pyrolysis on phase selection in the MgO-MgAl₂O₄ system: T.Bhatia, K.Chattopadhyay and V. Jayaram, Mater. Sci. Engg. A 226-228, 930 (1997)
38.	Degradation of Al₂O₃-SiC-Al composites prepared by the oxidative growth of Al alloys into SiC particulate: Sandeep Kumar and V. Jayaram, J Mater. Sci. 32, 4719 (1997)
37.	Sliding wear of Al₂O₃-SiC-Al, Si composites against steel counterface: A.Ravikiran, V. Jayaram and S.K.Biswas, J Am. Ceram. Soc. 80, 219 (1997)
36.	Phase evolution and densification in spray-pyrolysed ZrO₂ - Al₂O₃ powders: A.S.Gandhi, V. Jayaram and A.H.Chokshi, Materials Science Forum 243-245, " Superplasticity in Advanced Materials, 227 (1997)
35.	Infiltration of Al₂O₃-Al composites into coated silicon carbide: V. Jayaram, S.Kumar, T.V.Mani, M.S.M.Saifullah, J.Sarkar and K.G.K.Warrier, in " Inorganic Matrix Composites " ( ed ) M.K.Surappa, The Minerals, Metals and Materials Society, Warrendale, 193 (1996)
34.	Microstructure and mechanical properties of Al₂O₃ (Al/AlN) composites fabricated by pressureless infiltration of Al alloys: N.Nagendra and V. Jayaram, in " Advances in Composites ",( eds. ) E.S.Dwarakadasa and C.G.K.Nair, Allied Publishers, Bangalore, 111 (1996)
33.	Containerless processing of ceramics by aerodynamic levitation: A.S.Gandhi, A.Saravanan and V. Jayaram, Mater. Sci. Engg. A 221, 68 (1996)
32.	The role of volatile solute elements in directed melt oxidation of Al-alloys: V. Jayaram, J. Mater. Sci. 31, 4591 (1996)
31.	Microstructural control and wear of Al₂O₃-SiC-(Al,Si) composites made by melt oxidation: V. Jayaram, R.Manna, M.G.Kshetrapal, J.Sarkar and S.K.Biswas, J Am. Ceram. Soc. 79, 770 (1996)
30.	Synthesis and characterization of metastable ceramic oxides: V. Jayaram, in " Advances in Physical Metallurgy ", (eds.) S.Banerjee and R.V.Ramanujan, Gordon and Breach Inc. Pennsylvania, 455 (1996)
29.	Growth of Al₂O₃/Al composites from Al-Zn alloys: M.Hanabe, V. Jayaram and T.A.Bhaskaran, Acta Metall. Mater. 44, 819 (1996)
28.	Development of nano-composite microstructures in Al₂O₃-ZrO₂ via the solution precursor method: M-L. Balmer, F.F.Lange, V. Jayaram and C.G.Levi, J Am. Ceram. Soc. 78, 1489 (1995)
27.	Early stages of composite formation by oxidation of liquid aluminium alloys: O.Salas, V. Jayaram, K.C.Vlach, C.G.Levi and R.Mehrabian, J Am. Ceram. Soc. 78, 609 (1995)
26.	Growth and microstructure of Al₂O₃-SiC-Si (Al) composites prepared by reactive infiltration of silicon carbide preforms: S.P.Dhandapani, V. Jayaram and M.K.Surappa, Acta Metall. Mater. 42, 649 (1994)
25.	Metastable extension of the fluorite phase field in Y₂O₃ - ZrO₂ and its effect on grain growth: V. Jayaram, M. de Graef and C.G.Levi, Acta Metall. Mater. 42, 1829 (1994)
24.	MMC, CMC and microstructural gradients by nitridation of aluminium alloys: V. Jayaram, B.S.S.Daniel, N.Nagendra and H.R.Muralidhar, Trans. Mater. Res. Soc. - Japan,14A, 621-624 (1993)
23.	Directed melt oxidation and infiltration: V. Jayaram, Metals, Materials and Processes 4, 51 (1992)
22.	Ceramic composites by melt oxidation: V. Jayaram, Materials Engg. 3, 247 (1992)
21.	Banded microstructures in Al₂O₃ / Al composites produced by oxidation of molten Al-Mg alloys: O.Salas, V. Jayaram, K.C.Vlach, C.G.Levi and R.Mehrabian, Symposium on Processing and Manufacturing of Advanced Materials for High Temperature Applications III, (eds.) V.A.Ravi and T.S.Srivatsan, The Minerals, Metals and Materials Society, Warrendale, 143 (1992)
20.	Ceramic composites by directed melt oxidation: V. Jayaram, in New Materials, (eds.) S.K.Joshi, C.N.R.Rao, T.Tsuruta and S. Nagakura, Narosa Publishing House, New Delhi (1992)
19.	A thermogravimetric study of the oxidative growth of Al₂O₃-Al alloy composites: K.C.Vlach, O.Salas, H.Ni, V. Jayaram, C.G.Levi and R.Mehrabian, J Mater. Res. 6, 1982 (1991)
18.	Nucleation and growth of Al₂O₃/Al composites by oxidation of aluminium alloys: O.Salas, H.Ni, V. Jayaram, K.C.Vlach, C.G.Levi and R.Mehrabian, J. Mater. Res. 6, 1964 (1991)
17.	Characterization of alumina-zirconia produced by electrohydrodynamic atomisation: V. Jayaram, C.G.Levi, T.Whitney and R.Mehrabian, Mater. Sci. Engg. A 214, 65 (1990)
16.	The structure of d -alumina evolved from the melt and the g -d transformation: V. Jayaram and C.G.Levi, Acta Metall. 37, 569 (1989)
15.	Comment on " Number of active slip systems in polycrystalline brass: implications for ductility in other structures" by R.Fleischer: V. Jayaram, Scripta Metall. 22, 741 (1988)
14.	Rapid solidification of ceramic eutectic and hypoeutectic alloys- alumina, zirconia: T.Whitney, V. Jayaram, C.G.Levi and R.Mehrabian, in D.M.Stefanescu, G.J.Abbaschian and R.J.Bayuzick (eds.), " Solidification Processing of Eutectic Alloys ", Metallurgical Society of AIME, 199 (1988)
13.	Phase selection in electrohydrodynamically atomised alumina: C.G.Levi, V. Jayaram, J.J.Valencia and R.Mehrabian, J. Mater. Res. 3, 969 (1988)
12.	Some observations of microstructural changes in alumina induced by Ti inhomogeneities: V. Jayaram, B.J.Dalgleish and A.G.Evans, J Mater. Res. 3, 764 (1988)
11.	A model for compressive deformation and fracture in WC-Co: D.J.Rowcliffe, V. Jayaram, M.K.Hibbs and R.Sinclair, Mater. Sci. Engg. A 105/ 106, 299 (1988)
10.	The precipitation of a -TiO₂ from supersaturated solutions of Ti in alumina: precipitate structure and morphology: V. Jayaram, Phil. Mag. A 57, 525 (1988)
9.	Plastic incompatibility and crack nucleation during deformation on four independent slip systems in tungsten carbide - cobalt: V. Jayaram, Acta Metall. 35, 1307 (1987)
8.	Fracture energy of ceramic- metal interfaces: R.M.Cannon, V. Jayaram, B.J.Dalgleish and R.M.Fisher, Proc.Conf. Ceramic Microstructures, " The role of Interfaces ", Berkeley, 21 (1986)
7.	Microstructural and chemical components of the fracture energy of ceramic- metal interfaces: R.M.Cannon, V. Jayaram, B.J.Dalgleish and R.M.Fisher, Proc. MRS Symposium on Electronic Packaging and Materials Science, Palo Alto, 54-799 (1986)
6.	Plastic deformation of WC-Co at high confining pressure: V. Jayaram, A.Kronenberg, S.H.Kirby, R.Sinclair and D.J.Rowcliffe, Scripta Metall. 20, 701 (1986)
5.	Deformation enhanced decarburisation of WC-Co: V. Jayaram, R.Sinclair and D.J.Rowcliffe, Scripta Metall. 20, 55 (1986)
4.	Detection of thin intergranular cobalt layers in WC-Co by lattice imaging: V. Jayaram and R.Sinclair, J Am. Ceram. Soc. 66, 137 (1983)
3.	Intergranular cracking in WC- 6% Co: an application of the von Mises criterion: V. Jayaram, R.Sinclair and D.J.Rowcliffe, Acta Metall. 31, 373 (1983)
2.	A TEM study of intergranular cracking in WC-Co: V. Jayaram, Proc. 40^th Annual Conference of EMSA, 632 (1982).
1.	A microstructural characterisation of deformation and precipitation in (W, Ti) C: S.L.Shinde, V. Jayaram and R.Sinclair in " The science of hard metals ", R.K.Viswanadham, D.J.Rowcliffe and J.Gurland (ed.), Plenum, 1983